Blog

What gets henna out of clothes?

What gets henna out of clothes? Drip a little laundry soap onto the stain and scrub in short, circular movements. Scrub until the stain fades, and then rinse with cold water. An old toothbrush is the precise tool to brush the stain. Keep scrubbing until the stain fades away.

Can I reuse a grout float?

Can I reuse a grout float? Grout floats and tile sponges are the weapon of choice for an installer during the initial cleaning of grout after installation of the tile. … You should always have several sponges on hand and change them out as they fill with sand from the excess grout. After they dry, you can shake the sand out and reuse them later.

How do you remove oil based stain from concrete?

How do you remove oil based stain from concrete? Mix one part muriatic acid with 20 parts water in a bucket. Clean the stain off with the mixture. If the stain is not removed, strengthen the mixture by one part (1 part acid with 19 parts water). Continue making the solution stronger until the stains are removed.

Does benzoyl peroxide bleach?

Does benzoyl peroxide bleach? Benzoyl peroxide is a harsh solution that can cause bleaching. It may cause your skin to look whiter, and can affect the color of your hair (including your eyebrows) if it comes into contact with the same strands regularly and repeatedly. Benzoyl peroxide can also bleach clothing and other materials.

Can you rinse grout down the drain?

Can you rinse grout down the drain? Grout and thinset mortar are types of concrete and should never be rinsed down drains. Remember concrete contains sand and can actually harden underwater, which makes it perfect for clogging pipes. …

How do you dilute bleach to remove stains?

How do you dilute bleach to remove stains? Dilute a little bleach in a lot of water to create a weak bleach solution. For spot stain removal, dip a clean, white cloth in the bleach solution and blot the stain. For larger stains, soak your garment in the bleach solution. Repeat until the stain is gone.

What is the best way to clean wood paneling?

What is the best way to clean wood paneling? For wood paneling on just the lower half of a wall, use a dusting cloth to remove dirt and lint, which can collect more often in this area. For full walls or upper walls, get a duster with an extension. Then, apply a solution of Murphy® Oil Soap and water, and wash down the walls.

How much does it cost to clean central air ducts?

How much does it cost to clean central air ducts? How much does air duct cleaning cost? According to the Environmental Protection Agency, properly cleaning an entire system in an average-sized home may typically range in cost from $450 to $1,000.

How can I get my grout white again?

How can I get my grout white again? Saturate the grout with lemon juice, a mild disinfectant that gets rid of grout stains naturally. You can also use white vinegar for chemical-free grout cleaning. Simply pour vinegar from the bottle into the cap and pour it over the dirty grout lines. Allow the lemon juice or vinegar to sit for 10 to 15 minutes.

How do you clean grout without damaging marble?

How do you clean grout without damaging marble? Use a stiff-bristle toothbrush and wet it with warm water. Put a small amount of baking soda on the bristles. Gently scrub the grout in between the marble tiles with the toothbrush in a back and forth motion. Be careful not to brush the baking soda into the marble tiles.