Sweep or vacuum-clean your wood floors as often as needed. Use Bona’s mild, specially formulated Wood Floor Cleaner for the best results. Do not use ”all-purpose” cleaners on your wood floors, as they tend to leave a dull residue. You normally end up using too much water as well, which is damaging to your wood floors.
Similarly one may ask, how do you keep a varnished floor shiny?
Considering this, how do you clean really dirty hardwood floors?
Tip
- Sweep the floor thoroughly with a vacuum cleaner. …
- Pour 1/4 cup of apple cider vinegar in a clean mop bucket. …
- Dip a cotton cleaning cloth in the vinegar solution. …
- Wipe the cloth over a 3-by-3-foot section of the wood floor to remove dirt and grime buildup.
Can you steam clean varnished wood floors?
The simple answer is No; you should never use a steam mop on a hardwood floor. … Damage to hardwood floors associated with water or steam can be irreparable and the only option would be to remove the whole floor and start again.
Is mopping wood floors bad?
Wet mopping can cause your wood floors to swell
The rule of thumb here is that water and wood do not mix. Wood can act like a sponge when it’s around water. Too much, and it will start to swell up. Too little, and it the boards can shrink as they dry out.
How do you protect varnished wood?
To protect varnished wood, apply a coat of paste wax. You don’t need to do this very often. While applying wax helps protect from moisture and dust, never do this more than once a year to prevent wax buildup. If there is wax buildup, remove it with a cloth dampened with mineral spirits or synthetic turpentine.
How do you freshen old wood floors?
Spray a small amount of hardwood cleaner onto the floor, and then wipe the floor down with a dry terry cloth mop. If your floor is riddled with spots, stains, scuff marks, or debris, remove them with mineral spirits and then mop the area thoroughly.
How can I make my wood floors look new again?
Is Pine Sol good for wood floors?
We like using Pine-Sol® Original Pine Multi-Surface Cleaner on hardwood floors. … You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
Can you use Dawn dish soap on hardwood floors?
How to clean wood floors. … Begin by dusting or sweeping your floors well. Then make a cleaning mixture using 4 cups warm water and a few drops of castile soap or dish soap. Do not shake, but gently mix this, then mop or scrub small sections at a time, drying them with a clean cloth or dry mop after.”
Is Murphy’s oil soap good for wood floors?
Whether you’re cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
