Also, recommended but not required is the use of a deck brightener before staining your deck. Deck cleaners, such as the Wood Deck Cleaner and Brightener by DeckWise or the TimberTech Deck Cleaner, will lift and remove any stuck-on grime from your wood deck boards.
Also to know is, should you pressure wash deck before staining?
Power washing a deck is a quick and efficient way to get it ready for painting or staining, but it isn’t a necessary prerequisite. In fact, in some situations, it isn’t even a good idea, because power washing can chip and gouge wood.
Just so, what is the best way to clean a wooden deck?
Cleaning Your Deck
After sweeping your deck and clearing the cracks, it is important to clean the wood. To do this, you can either use a deck cleaner or bleach, cut in half with warm water, and a scrub brush. Either of these methods will work wonders on algae and mildew.
Is it better to stain or seal a deck?
Sealing a deck is best for cedar, teak, mahogany, or other quality woods as it enhances the wood grain and natural color. Staining a deck protects the wood from mold, mildew, moisture, and rot, and UV rays and sun damage.
Will pressure washing remove deck stain?
Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain. Hold the sprayer about 3 inches off the surface and move the sprayer as you work in the same direction as the grain.
What if it rains after I stain my deck?
If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.
Is it OK to pressure wash a wood deck?
For cleaning a wooden deck, you’ll be best served by using the lowest pressure setting that’s still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi. … Never get closer than 12 inches from the deck unless you’re using low pressure.
